buggalcrafts

Crafts from my heart to yours!

Archive for the tag “quick Christmas craft project”

Button Snowflake


Popsicle SnowflakeButton Snowflake

This snowflake used either as an ornament or a tree topper is a great way to display all those white and translucent white buttons your mother or grandmother left you in their button jar.   With these special buttons the snowflakes would be a great way to share a treasured memory with your close relatives.   

This would also be a great inexpensive “bulk craft” for a church children’s group or a school classroom art projects.  To keep the project to one session, pre-glue and paint the snowflake. Then allow the kids to decorate their snowflakes with buttons, trim and markers.

Materials

  • Popsicle sticks (4 per snowflake)
  • White & translucent white buttons (assorted sizes)
  • Large decorative white buttons (for the center)
  • Lace & trims
  • DecoArt Snowflake White acrylic paint
  • White Glamour Dust Ultra-Fine Glitter paint (optional)
  • Green chenille stems
  • Clothespins (optional)
  • Clear fishing line (optional)

Also Needed

  • Craft glue
  • Glue gun
  • Wire cutters

Instructions

  1. Glue four Popsicle sticks together in a “snowflake” pattern then allow the glue to dry.
  2. Give the snowflake two coats of white paint and allow the paint to dry between coats.
    1. Spray paint the sticks white before gluing them together if you are mass producing the snowflakes.
  3. Flip and repeat.
  4. For a nice shimmery finish on the snowflakes apply one or two coats of white ultra-fine glitter paint to the front of the snowflake.  Allow paint to dry.
  5. Glue lace to the snowflake for a more Victorian effect.
  6. If needed cut the shanks off buttons with wire cutters.
  7. Lay out your buttons on the snowflake.  Graduate the sizes of the buttons starting with the larger ones in the center.  Use the smallest buttons on the ends of the snowflake.  Choose a large decorative button for the center.
  8. Glue the buttons down and allow the glue to dry.
  9. Attach a hanger to the snowflake.
    1. Glue a green chenille stem to the back of the snowflake (center).  If your tree is not green use a stem of a matching color.
    2. Mount your snowflakes on clothespins so they will clip to the branches.  Paint the clothespins green first so they will blend into the tree.
    3. To hang your snowflakes suspended in a window tie a long strand of clear fishing line to the top of the snowflake.
  10. You are then ready to display your snowflake.
Advertisements

“You Warm My Heart!” Cocoa Packs


You Warm My Heart Cocoa Packs“You Warm My Heart!” Cocoa Packs

I came up with these little goodie packs for our Santa Shop at my granddaughter’s school.   Our best sellers are mugs and all the kids want one for their mother, father or grandparent.  These packs made the best little accompaniment to the mugs.  They are very simple to put together and inexpensive.   They were about 33₵ to 45₵ each.  I also did up some packs as a little token of appreciation for the school’s staff.

Adding a homemade cookie or two would make this a perfect little take-home party favor for your holiday party or a cheap bulk Christmas gift for those you need to just give a “little something” too.  Pair it with a holiday snowman mug.

Materials Needed

  • Cocoa packs
  • Candy canes
  • Snowmen marshmallows
  • Cinnamon sticks
  • 3×4 zip lock bags (craft bags)
  • Treat bags (clear or snow print)
  • Ties: chenille stems, tri-color yarn, ribbon
  • White cardstock
  • Red cardstock

Also Needed

  • Tag punch
  • Heart punch
  • Small hole punch
  • Glue stick
  • Bamboo skewer

Instructions

  1. Wash hands well and assemble supplies.
  2. Break the cinnamon sticks in half if they are too long.  Then if they are too “fat” insert a knife in the center of the curls and twist to split them in two.
  3. Put two or three marshmallows in each small zip lock bag.  If you can’t find snowmen marshmallows use plain or make a marhmallow snowman for each bag.  Search the internet – I found a whole flock (herd? gaggle? troop?) of different marshmallow snowmen crafts on Goggle from the simple to complex.
  4. On your computer open a document and make a label that will fit your tag punch or that’s at least 2×4 inches.  I used a candy cane font in red to type the words “You warm my _ .” leaving a blank space for a heart punch.  Print tags.
  5. Punch the tags and the hearts.  If you don’t have a tag punch then handcut the tags.
  6. Glue the hearts on the tags.
  7. Punch holes in the ends of each tag.
  8. Place a cocoa packet, cinnamon stick, candy cane and marshmallow pack in each goodie bag.   I used full size canes for the bags I gave the staff.
  9. Curl the ends of the chenille stem around a bamboo skewer.
  10. Tie the trim around the bag and attach the tag to the ends.  I cut chenille stems in half to use as the ties.  After twisting the chenille stem around the bag insert both ends through the hole in a tag.  I then bent the ends of the stem back on itself to eliminate any sharp ends that might poke someone.  Lastly I curled the ends around a bamboo skewer.
  11. I also used tri-color yarn to tie off some of the bags.   Tie a bow and then knot a tag on one end of the yarn.
  12. Place bags in a basket and they are ready to gift!
Curl the ends of the chenille stem around a bamboo skewer.

Curl the ends of the chenille stem around a bamboo skewer.

Thanks for taking a look.  As always I’d love to hear from you.  

Christmas Cards for Your Kids to Make!


Christmas Cards for Your Kids to Make!

 If your kids are like mine they love to give gifts but buying gifts for EVERYONE on your little person’s list (from grandma to the dog to the man in the moon) is impossible unless you are independently wealthy!  If you are then stop reading this and immediately wire me a couple of million (lol)! 

I always took my kids to a dollar store (the one’s where everything is literally a dollar) when they were younger to buy their gifts.  But the usefulness and quality of the selections leave a little to be desired and after all – how many coffee mugs and “dust collectors” can one person use?

So, why not make a gift card that will last longer than the gift?  If you have punches grab some wrapping paper, construction paper, glue, gift ribbon, buttons, yarn, etc.  If you don’t have any punch outs you can acquire some punch outs on eBay or Listia.

This craft project costs you nothing but time to make the punch outs as you simply use materials like construction and wrapping paper and glue sticks – which every prudent mother has on-hand.  I also like this craft project because it saves bits and pieces of paper (i.e.; the wrapping paper scraps) and crafting materials (ribbon “snips”, stray rhinestones, etc.) from the trash.   I keep a jar beside my craft desk and I throw those scraps of ribbon, stray rhinestones and buttons, snips of fabric, and such.  And when I am doing a project that requires bits I turn to this jar.

This also makes a great last minute gift (or even a “not-so-last-minute”) when combined with some handmade coupons for a kiss, a hug, 10 minutes of quiet time, clean room, trying a new vegetable, etc.   If you are at a lost on how to get started there are some very good sites out there that will show you how.  Find one on eHow;  “How to Make a Printable Coupon Kids Can Give”And find some great suggestion on what to put on your cards on Kids Love To Know “How to Your Own Coupons Your Parents”.

MATERIALS:

  • Construction or scrapbook Paper
  • Blank note cards (optional)
  • Large envelopes (optional)
  • Stamps (optional)
  • Punches
  • Scissors
  • Glue sticks
  • Markers, gel pen, metallic sharpies, crayons
  • Other Materials: yarn, gift wrap ribbon, rick-rack, sequins, mini pom-poms, “paper” stickers, rhinestones

 INSTRUCTIONS:

  1. Cut or help your child to cut a piece of construction paper in half then fold it to make a card. The cards can be any size but I found a note card size worked best for me.  If making gift cards to attach to presents cut the paper into fourths then fold.
  2. Provide the paper materials to your child.  Help them to make punch outs if needed. 
  3. Save the reverse punches (the “hole” left behind in the paper).  These make some really cute cards.  For example; Punch out a row of evenly spaced hearts (make the first punch, then place the puncher edge touching the right edge of the hole and make the second punch, and so on).  Apply glue “around” the holes and then glue a wrapping paper strip to the paper (design side down so the wrapping paper design shows through the heart shaped holes).  Let dry and then cut the reverse punch strip off.  Glue to the card.
  4. Let your kids decorate the outside of the cards the punches and embellishments.  I have posted photos of some sample cards I made.  Coordinate the cards with the wrapping paper if the card is to be placed on a gift.
  5. Help your kids write a personal message on the inside of the card and then let them sign it.  If you are using a dark color of paper give them a metallic sliver Sharpie or gel marker to do this.  Another option is to cut pieces of light colored construction paper slightly smaller than the card and glue it on the insides of the cards.  Either write on it before your child glues it or allow the glue to dry before writing the message.
  6. Finish the card off perfectly with a stamp or sticker won the back.  Or simply write something like “Buggal Cards” or “Made especially for you by Buggal”.
  7. Wrap the card with gift wrap and then delver it in person or put it in an envelope and mail to the recipient.
  8. Don’t forget to take photos for your scrapbook!

  Thanks so much for taking a look.  I’d LOVE to hear from you!

buggalcrafts

To make a REVERSE PUNCH STRIP, Punch out a row of evenly spaced hearts (make the first punch, then place the puncher edge touching the right edge of the hole and make the second punch, and so on).

To make a REVERSE PUNCH STRIP, Punch out a row of evenly spaced hearts (make the first punch, then place the puncher edge touching the right edge of the hole and make the second punch, and so on).

Apply glue “around” the holes and then glue a wrapping paper strip to the paper (design side down so the wrapping paper design shows through the heart shaped holes).

Apply glue “around” the holes and then glue a wrapping paper strip to the paper (design side down so the wrapping paper design shows through the heart shaped holes).

Let dry and then cut the reverse punch strip off.  Glue to the card.

Let dry and then cut the reverse punch strip off. Glue to the card.

Glue the strip to the card.

Glue the strip to the card.

Snowflake Card: Save those mis-punched snowflakes then glue them to the edges of the card for a complete "snowy" look. I used 3 sizes of snowflake punches.Holly Card:  Run a line of glue across the card in a wavy pattern.  Then glue a piece of yarn to the page.  Let dry and then accent with holly and berries (martha Stewart Holly & Berries punch).  The berries the punch makes are way small so I punch bigger berries with a regular hole punch..

Snowflake Card: Save those mis-punched snowflakes then glue them to the edges of the card for a complete “snowy” look. I used 3 sizes of snowflake punches.
Holly Card: Run a line of glue across the card in a wavy pattern. Then glue a piece of yarn to the page. Let dry and then accent with holly and berries (martha Stewart Holly & Berries punch). The berries the punch makes are way small so I punch bigger berries with a regular hole punch..

Flower Card:  Use rick-rack or use a zig-zag punch (EK Sucess) to make paper rick-rack for the stems.  I used a comos punch to punch a flower from red construction paper and red gingham wrapping paper.  Glue them together and glue a 1/2 inch round punch as the center.  Glue to card and when dry bend the petal up to create a 3D effect.Present Card:  Simply glue ribbon in a criss-cross pattern and then use a jumbo Recollections tag punch to make a tag.  Write a message on the tag and you're done!.

Flower Card: Use rick-rack or use a zig-zag punch (EK Sucess) to make paper rick-rack for the stems. I used a comos punch to punch a flower from red construction paper and red gingham wrapping paper. Glue them together and glue a 1/2 inch round punch as the center. Glue to card and when dry bend the petal up to create a 3D effect.
Present Card: Simply glue ribbon in a criss-cross pattern and then use a jumbo Recollections tag punch to make a tag. Write a message on the tag and you’re done!.

Gingerbread Cameo:  Glue a strip of ribbon to the card.  I save the tail end scraps of ribbon rolls for this purpose.  Glue a 2 inch cameo (EK Sucess) in the center of the card.  Then glue a punch or place a sticker in the cameo.Snowman Card:  I used a McGill snoman punch to make these snowmen but you could just as easily use nesting cirle punches and stack them.  Draw on the features and arms with markers.

Gingerbread Cameo: Glue a strip of ribbon to the card. I save the tail end scraps of ribbon rolls for this purpose. Glue a 2 inch cameo (EK Sucess) in the center of the card. Then glue a punch or place a sticker in the cameo.
Snowman Card: I used a McGill snoman punch to make these snowmen but you could just as easily use nesting cirle punches and stack them. Draw on the features and arms with markers.

"Candy

 

Paper or Foam GingerBread Garland


Paper or Foam GingerBread Garland

I’ve posted tutorials for several versions of Cookie Cutter Garland that I made last year but I never got around posting the tutorial for this Paper or Foam Gingerbread Garland.

I love this project because you can make it as simple or as complex as you wish and you can use whatever you have on-hand or can be purchased at a dollar store for under $5.

I challenge you to complete your own garland without buying anything (or with whatever you can purchase for under $5) and send me a photo.  I will definitely add your photo to the tutorial.

Materials

  • Gingerbread Men
    • Gingerbread People Wrapping Paper (on hand)
    • Pad of Paper Gingerbread Men (pad of 50 for $3 from a school supply store)
    • Foam Gingerbread Men (10/$1 from Dollar Tree or Michaels)
  • Candy Canes
    • Paper Candy Cane Garland ($1 from Dollar Tree)
    • Candy Cane Wrapping Paper
    • Foam Candy Canes (10/$1 from Dollar General)
  • Cardstock, Plaid Wrapping Paper, Scrapbook Paper, Brown Paper Bags  (on hand)
  • Thin Cardboard  (on hand)
  • Stringing Material – Jute, Yarn, or Raffia (on hand)
  • Red & Green Wooden Beads (on hand) I used beads from a bead garland purchased years ago at a dollar store for $1.
  • Small Wooden Spools (on hand or $1 for small spools of thread at the Dollar Tree)
  • Torn Fabric Strips (on hand)
  • Small Grapevine Wreaths (on hand)
  • Gingerbread Men Embellishments:  mini cookie cutters, jingle bells, buttons, plastic hair bows, etc. (on hand)

 Also Needed

  • Punches: Heart, Round, Star, Bow, Candy Cane (on hand)
  • Zigzag or Pinking Scissors or Zigzag Punch (on hand)

Instructions

  1. Gather or purchase your materials from your stash or make dollar store, craft store or flea markets.
  2. Punch all shapes needed to decorate the gingerbread men. I used the pieces I trimmed off the candy cane garland to punch the hearts and bows from so that the gingerbread men decorations would match the candy canes.
  3. Make or punch cardstock “rick-rack”.  PAPER RICK-RACK DIRECTIIONS:  Make the with paper rick-rack made from cardstock (color of your choice – I used white) using zigzag scissors.  I found that if you cut the cardstock in half lengthwise you can then trim the bottom straight edge (the short way) to start the rick-rack pattern, then place the scissors with the right edge of the blade touching the zigzag edge you can cut fairly even pieces of “rick-rack”.  You could also use real rick-rack if you have it on hand.  I recently bought a EK Success Slim Edger Punch: Zig Zag Chain and it’s now super easy to make evenly cut paper rick-rack for my gingerbread projects!
  4. Next decorate the gingerbread shapes.   Glue paper or real rick-rack to the arms & legs (and head if desired).  Then add heart, star or round paper or foam “buttons”.  I added a center (from foam or paper) using a regular hole-punch shape to the heart “buttons”.  Glue the bow on (paper punch or a bow made from a fabric strip). You can use any embellishments you have on hand to decorate your shapes.   I found some plastic little girl bow barrettes that I cut the bow off to use.
  5. Cut out the candy cane shapes from wrapping paper or cut apart from a paper garland.  You could also use pre-cut foam shapes.  I found a package of large (10 inch) gingerbread shapes at the Dollar Tree and a set of smaller ones (6 inches) at Target for $1 for 10.  Michaels and Dollar General also had red candy cane shapes (cut white foam stripes and add to cane if desired) at for a dollar.  Fabric wrapped plastic candy canes could be used in the place of the paper or foam candy canes.
  6. You can also add other foam or paper shapes to the garland, like hearts or stars, to the garland.
  7. Reinforce the shapes (gingerbread, candy cane, heart, and star, etc.) by gluing them on a thin piece of cardboard or thick brown paper bag and trim close to the edge with scissors.  Add a hole reinforcer if desired (see below).
  8. Add a decorative edging to the shapes by gluing them to a brown paper bag, cardstock (red, green or other color to match your décor), wrapping paper, etc.  If using one-sided paper and plan to have a decorative edge showing face the paper to the front of the shapes.  Then trim close to the edge or leave a decorative border with zigzag scissors.
  9. Punch holes in the shapes.  For the first garland I made I punched pinpoint (1/4 inch) holes on either side of the shapes and connected them with raffia.  I used clear hole reinforces from an office supply store to make sure the holes did not pull through.  If you only have the white ones you can put them on the underside of the paper before gluing it together.  Try putting the layers together leaving a gap at the top then put on the rein forcers punch the holes and then glue the edges together.  You could also apply clear round labels before punching the holes.  On the other garland I used a hole punch to put a hole in the top of the shapes and then attached them to the jute with raffia.  Another option would be to string the shapes like beads.
  10. Measure and cut your stringing material to the desired length.  I made mine four or five feet long but you can make it any length needed to fit your “space”.
  11. Attach the shapes by stringing them on jute or yarn like beads or by tying the shapes to a piece of raffia or a piece of torn fabric ribbon.  Be sure to space them evenly.  You can also tie the shapes together with raffia instead of stringing them or tying them on.   If you space the shapes far enough apart you can use the “blank” space between to hang Christmas cards on.
  12. If desired add beads and small wooden spools between the shapes (I wound green thread around them the spools I used).  If your gingerbread shapes are big enough to be in scale you could use the small spools of thread found in a pack of 12 for a dollar at the Dollar Tree.
  13. Make and attach bows then attach them at regular interval down the garland between the shapes.  To make bows tear country print fabric (checked, plaid or striped in the colors of your choice) into 1 to 1 ½ inch wide strips and about 10 inch long.  To make bows first tie a piece of raffia in the center of a fabric strip then tie a simple shoestring type bow.   Use the raffia ends to tie the bows in place.
  14. An alternative of the shoestring bow is to tie fabric strips in different colors simply tied around the stringing material and then knotted in a double knot.  Trim the edges of the bows as needed.
  15. Tie off the ends with small grapevine wreaths or simply loop the ends to create “hangers”.
  16. Your garland is now ready to hang.  Hang it on the wall, above a door, on the tree or above the mantel.  As this is made from paper, don’t use it where it could get wet (or catch on fire).

Thanks so much for taking a look – and don’t forget that I’d love to see what you come up with!     buggalcrafts

HAND-CUT PAPER RICK-RACK DIRECTIIONS: Make evenly cut paper “rick-rack” from cardstock using zigzag scissors.

• Cut a scrap piece of cardstock to about two inches lengthwise (the length of the scissor blades). You need to be able to make one cut through the paper with the scissors.
• Trim the bottom edge evenly with the straight scissors.
• Then start the rick-rack pattern by trimming the bottom edge using the zigzag scissors.
• FLIP the paper over and place the scissors with the right blade touching the zigzag edge you just cut.
• Flip the paper and repeat again.

Mini Beaded Candy Cane Earrings


Mini Beaded Candy Cane Earrings

Made from just seven beads these mini canes are the perfect holiday earrings for a young girl or any time you just want a hint of bling.

The real beauty of these little earrings is there are so many variations you can make  – change the color – or the direction – or the length – or just make as many pairs in as different ways you can dream up!  I’ve listed a few below to get you started.

Variations:

  • Any Color Combination: Why stick with the traditional candy cane color combinations of red & white or red & green? Candy canes now come in so many different colors so why not make a pair to coordinate with every holiday outfit!
  • Any Size: Use a longer  headpin and more beads for longer earrings.  Use a different size bead for a more delicate or heavier look.
  • Any Direction: Turn your canes upside down to make a “J” for a “Jesus Cane”. Substitute an eyepin for the headpin to give you a ready to hang loop at the “bottom” of the cane.
  • Any Materials: Don’t have      headpins, eyepins or the like on-hand? Simply substitute a 2 inch piece of jewelry wire. Experiment with materials to achieve different looks – acrylic or glass beads – faceted or smooth – round or square.

Uses: 

Why only use these cute little canes to make earrings?  Like real candy canes they have a bevy of uses.  I’ve listed a few below to get you started.  I’d love to hear about how you’d use these beauties in your crafting this season!

 

  • Beaded Charm Pin:  “String” them as charms on a coil-less safety pin along with some beads.
  • Decorate a Dollhouse For Christmas:   Hang on the tree or have thempeeking out of a doll’s stockings.
  • Greeting Card Embellishments & Bonus Gift:  Attach a pair to a handmade greeting card with removable glue dots to serve as both!
  • Decorate a Christmas Scrapbook Page:   Hang them all in a row on a paper chimney to add some dimension to your page.
  • Wine charms:  Attach them to a wire hoop earring along with a few beads.
  • Dress Up a Pillar Candle:  Attach a dozen with a beaded pin made by gluing a small bead to a regular straight pin.
  • Decorate a Twig Tree:  Stick a twig from the garden in a rock filled container and hang some of the longer baby canes from the bare branches.

Materials

  • Four 4 mm Red Beads
  • Three 4 mm Green Beads
  • Two 1½ Inch Headpins
  • Two Fishhook Earring Wires
  • Two Jump Rings

Also Needed

  • Round  Nose Pliers

Photo Tutorial

Thanks so much for taking the time to view this post.  Please take a moment more to leave me a comment!

buggalcrafts a.k.a. melba

Up-Cycled Button Container


Up-Cycled Button Container

I LOVE the buttons in the small “button containers” for around a dollar from Wal-mart and Michael’s – the ones with a plastic barrel and enormous button top – and I’ve saved all the empty containers with endless crafting possibilities in mind!

There are just so many uses for these little containers:

Decoratively store your buttons until you are ready to use them.  Try displaying them in an old shadow box!

  1. Decoratively store your tiny crafting materials (like those googley eyes that always end up EVERYWHERE) in the same manner.
  2. Use every part of the button container: Use the LARGE button top as a craft accent on a “Cute as a Button” photo frame or other button craft project.  Use the barrel of the container as a drawer organizer in a shallow drawer.  And finally use the ribbon as an ornament hanger.
  3. Turning the entire container into a sewing ornament with fabric, rick-rack, lace and buttons.
  4. What ideas can you come up with?

Thanks so much for taking the time to read this post.  I’d love to hear your thoughts.  Please take the time to leave me a comment.

buggalcrafts a.k.a. melba

Curtain Ring Ornament Revisited: Gingerbread


Curtain Ring Ornament Revisited: Gingerbread

Back in January I did a tutorial on curtain ring ornaments and as July is the start of the Christmas crafting season I have revisited the craft for Christmas.  I LOVE gingerbread and sugar cookies so I went with a Gingerbread Theme!

I hope you enjoy the tutorial and I welcome your comments and suggestions!

buggalcrafts a.k.a. melba

Gingerbread Curtain Ring Ornament

Materials

  • Wood Curtain Ring
  • Scrapbook Paper
  • Gingerbread Button
  • Assorted Buttons: Heart, Mini White
  • Baker’s Twine
  • Narrow Rick-Rack
  • Embellishments: Tiny Cookie Cutters, Candy Canes, Merry Christmas, etc.
  • Jump Rings

Also Needed

  • White Tacky Glue
  • Scissors
  • Paint: Gingerbread Brown, Antique Copper Metallic
  • Jump Ring Opener (optional)

COOKIE CUTTERS: NOT JUST FOR COOKIES ANYMORE!: POST #4 – COOKIE CUTTER CHRISTMAS ORNAMENT


Christmas Ornament, Cookie Cutter:  Cookie cutters are great for making inexpensive, unbreakable ornaments for your Christmas tree.  Adding them is simple to easy!  Copper or brightly colored (avoid green when using greenery) show up best.  Don’t have the color you need? Spray paint cutters to match your desired color scheme!   Display those vintage cutters you have been collecting for years!  Consider using non-Christmas shapes on the tree for added variety and interest (ex:  Have a little boy?  Tie on colorful airplane, train, boat, etc. shapes.). 1st birthday? Then chose a shape to fit the theme of the party!  These simple “ornaments” may also be placed on the lower branches!

  1. To hang your cutter take a metal or plastic outline cookie cutter and tie a short piece of pretty holiday ribbon (or raffia) to match your color scheme through the cookie cutter and tie it of making a hanger.
  2. Tie a second piece of ribbon to the ribbon hanger and then tie it into a simple shoestring type bow.
  3. If you have a non-outline vintage cutter you would like to use add a ribbon hanger with a glue dot.  That way you can remove the hanger and use the cutter to cut cookies with.

Christmas Ornament, Cookie Cutter Scrapbook Paper Backed:  For added ump to the cookie cutter ornament add a backing to the cookie cutter.

  1. Prepare cutter as described above.
  2. Glue patterned scrapbook paper to solid color cardstock and let dry (or use cardstock that is patterned on one side and solid on the other).
    1. Use wrapping paper salvaged from this year’s gift giving to make next year’s ornaments.
    2. Have a new baby in the family?  Select “baby” cookie cutters (ducks, bottles. baby carriage, etc.) as a cutter.  Use wrapping paper salvaged from baby shower gifts.  Write the birth details (date, name, weight, etc.) on the back of the cutter with a fine tip permanent marker.  These would make great package decorations for the family at Christmas.
    3. Use wrapping paper from a child’s birthday to create an unique one of a kind memory ornament.  Journal on the back of the ornament.
  3. Carefully align the cutter (not cutting edge down) over the scrapbook/other paper until you are pleased with the design inside the cutter.
  4. Next trace the cookie cutter on the printed scrapbook paper and then cut the shape out.  Be sure the side you are going to glue the paper to is facing down.
  5. Glue the scrapbook paper to the back of the cutter with the patterned side showing through the cutter.  It’s easiest to glue to the “top” or non-cutting edge of the cutter.  Allow to dry.
  6. Tie on jingle bells, a spray of holly with berries, plastic mini candy cane and mini cookie cutters to really dress this ornament up!  Glue the embellishment in place on the cookie cutter with a glue gun (So the design is not hidden.).  If using a small pattern patter glue an embellishment inside the cutter on the scrapbook paper.

Align pattern to fit inside cookie cutter. You may need to "waste" some paper in order to get the pattern you want inside the cutter. Save these "wasted" peices to make punches to decorate paper crafts and cut designs from them to use on homemade greeting cards.

Trace the pattern on the paper taking care to keep alignment. Note on the star the "Love to Bake" inscription.

After drying, turn ornament over and add embellishments. On the star I glued a mini star cutter inside the ornament and the glued a mini gingerbread ornament to the top of the cutter. On the duck I tied a plastic diaper pin and baby bracelet on the ends of the ribbon (use table scatter or cake decorations leftover from the baby shower) and glued a duckie button on the inside of the cutter. I did not add anything to the stocking. DId you note it's not the same paper as pictured earlier? Be sure you have your cutter facing the right way when you trace it on the scrapbook paper!

Gingerbread Wooden Spoon


Gingerbread Wooden Spoon Instructions

I love wooden spoons – always have – I used to play with them all the time as a kid and now I rather stir with one than anything else!
So when I saw wooden spoons at the Dollar Tree at 4 for only a buck I just HAD to have some to see what I could come up to make with them.
And this was so super easy to make with two of my favorite crafting materials – punches and Mod Podge!

Materials

  • Wooden spoon
  • Mod Podge
  • Gingerbread punch
  • Small heart punches
  • Torn fabric strip about 20 inches long
  • Paint brush or cotton swab
  • Ornament hanger

Directions

  1. Start with a wooden spoon with a short handle.  Either purchase one with a short handle or cut the handle of a longer wooden spoon off and sand the top.
  2. Glue the paper/cardstock gingerbread punch to the back of the spoon bowl with Mod Podge.  Glue the embellishments on the gingerbread man.  Glue hearts in an arc above the gingerbread man.
  3. Paint over the punches with Mod Podge.  Cover the entire back of the spoon.  I used gold Glitter Mod Podge for a little glitz.
  4. Allow to dry and apply a second coat.  Dry.
  5. Apply Mod Podge to the spoon handle.  Wrap the fabric strips around the handle starting at the bottom.  Alternate wrapping the strips in a loose criss-cross pattern.  Stopping wrapping about 2 inches from the top of the spoon and tie a bow.  Insert a hanger under the ribbon on the back of the spoon before you tie the bow.

Thanks for taking a look at my gingerbread craft tutorial.  I’d love to hear from you!

buggalcrafts

Gingerbread Ornaments: Clothespins & Cinnamon Sticks and Mini Fabric Wrapped Candy Canes


Gingerbread Ornaments & Mini Fabric Wrapped Candy Canes

The inspiration for these ornaments was a craft project, Gingerbread Min Clothespins, on Eyeballsbyday’s craft blog which is expertly written and photographed by Maggie.  As I didn’t have any mini clothespins on-hand I used regular sized ones. Also I don’t paint that well – I need LOTS more practice – so I punched some dots & hearts from craft foam for the buttons, found some mini googley eyes and some fine white cord to make the mouth.  I cut some “icing” from white craft foam with zigzag scissors. I painted the clothespins with FolkArt Cinnamon Acrylic Paint and let them dry.  Then I glued all the attachments on the clothespins and daubed on some pink checks.  I did try my hand at painting features on some of them using a toothpick for the brush.

The project also inspired me to make gingerbread men from cinnamon sticks.  Again I painted some and glued attachments on others.  I glued on a piece of jute for a hanger.

One of the things I have gotten for FREE on listia.com (a great site!) was some mini vinyl gingerbread men (Oriental Trading sells these).  Since I was making clothespins ornaments I thought, “Hey!, why not glue these bad boys on clothespins too?”  I did and they came out cute too.  I am wondering if they would look better on natural or white-painted clothespins.  I use E-6000 glue to attach the vinyl gingerbread men to the clothespins.  I used white glue first but the gingerbread men broke off when I pinched the clothespins to attach it to a tree limb.

The last thing I added to my mini tree were some fabric wrapped candy canes also inspired by a craft project on Maggie’s blog.  I really liked how the ones wrapped in white muslin and then wrapped with red rick-rack turned out.

Take a look and let me know what you think.  I’d love to hear from you!

buggalcrafts

This slideshow requires JavaScript.

Post Navigation

%d bloggers like this: