buggalcrafts

Crafts from my heart to yours!

Archive for the category “Paper Punch Craft”

Jack O’ Lantern Punch Art


Jack O’ Lantern Punch Art

Super cute – super easy punch art project for Halloween!!!!  Use as a holiday decoration or on a gift tag.  Also very cute for a Halloween greeting card!!!  Eliminate the jack o’ lantern face and make a cute pumpkin for fall!

 

Advertisements

TRI-COLOR PUNCH ART MARDI GRAS BOW TIE


mg mask and jester's hat 003TRI-COLOR PUNCH ART MARDI GRAS BOW TIE

 This photo combines the Mardi Gras half-face mask shown in a prior post with the tri-colored bow tie covered in this post and a party hat and jester’s cap I will be covering in a future post.

Punch art items are hand-punched and trimmed each so each will be unique but that adds the character I look for in a handmade project. If I wanted perfect and the same card everyone else gives I’d buy one at the store!!! 

 

Materials:

  • Green, yellow & purple acid-free cardstock (plain or glittery & metallic)
  • Glue stick

 

Also Needed:

  •  Scissors
  • ek Success’ Bow Tie & Mustache punch
  • Marker

Instructions:

  1. Gather materials needed.
  2. Punch one bow tie from plain cardstock to use as a base. If desired u can make two tri-colored bow ties at once. Punch one tie in purple and green (all metallic or all plain). Punch one bow knot from gold and three from the plain cardstock for each tie you are making. You can, of course, do the ties and bow knot in any of the three colors you like.
  3. Stack the three bow ties and cut them in half.
  4. Glue the two halves to the tie base.
  5. Then prepare the bow knot. I like to glue several of the knots together to create a little dimension. After these dry glue the gold punch to the stack. When it dries glue it in the middle of the bow tie.
  6. One more step and the you will be ready to make your very own Mardi Gras card!

 

PUNCH ART MARDI GRAS HALF-FACE MASK


Now your mask is ready to use!

PUNCH ART MARDI GRAS HALF-FACE MASK

This makes a 2” Mardi Gras half-face mask that is perfect to decorate a handmade card, scrapbook page or other paper crafting item.  As punch art items are hand-punched and trimmed each will be unique.  And as with everything – practice will improve the outcome of your project.  

Materials

  • Green, yellow & purple acid-free cardstock (plain or glittery)
  • Glue stick

Also Needed:

  • Scissors
  • 2” oval punch
  • 3/4” oval punch
  • ½” circle punch
  • ½” fleur-de-lis punch
  • Marker

Instructions:

  1. Gather materials needed.  Punch 2” oval and two fleur-de-lis.
  2. Mark eye holes on the 2” oval punch out with a marker. Note be careful to use only a small dot as the marker can bleed through the cardstock (as you can see in my photos).
  3. Center the small oval punch over the marked eye holes and punch.
  4. Use the small circle punch to make an indent for the nose.
  5. Trim sharp edges from the nose bridge.
  6. Punch or cut ribbons.
  7. Glue ribbon’s to both sides of the masks.
  8. Attach the fleur-de-lis punches over the ribbons with a thin strip of adhesive foam tape.
  9. Your mask is now ready for your scrapbook page or greeting card.

VARATIONS:

  1. Use glittery cardstock.
  2. Punch mini holes in the edges of the mask and use twine as “ribbons” to tie the mask in place.
  3. Glue self-adhesive rhinestones, jewels or pearls around the edges of the mask.
  4. Instead of using fleur-de-lis to decorate the edges of the mask use mini masks, diamond shapes, etc.
  5. Decorate the mask with a paint marker or scrapbook pens.
  6. Punch an oval from each color and then a fourth mask to use as a base. Stack the three masks and then cut them in thirds. Glue the right end of one color on the right end of the base mask. Glue the middle of a second mask to the middle of the base. Lastly glue a left end on the base mask. Allow to dry and the punch the eye holes. Repeat using the rest of the mask pieces.

Cute Snowman Punch Art Card


Cute Snowman Punch Art Card

snowman 001 (2)This card is as easy to make as it is cute.  The only item you may need to practice on is the hat!

  • 2 nesting circle punch outs in white and 2 in black cardstock  (2 1/2″ & 3″)
  • 2 bare branch tree punch outs in brown cardstock
  • 1 large cloud punch in green plaid cardstock (2″)
  • 1 flower punch out in green plaid cardstock (1/2″)
  • 1 heart punch out in green crimped cardstock (2 1/2″)
  • 2 small button punch outs in green cardstock
  • assortment of small circle punch outs in black cardstock
  • 1 small folk heart punch out in orange cardstock
  • Scarf:  3 arcs punch outs made from green plaid cardstock using a circle punch & 3 small circle punch outs

INSTRUCTIONS:

  1. Glue the white circles to the black circles allowing the black circles to peek out on one side.
  2. To make the nose trim the top of the orange folk heart with a circle punch.
  3. To make the scarf punch 2 arcs from green plaid cardstock then assemble the top and bottom snowballs sandwiching one of the arcs between them.  Trim the arc as needed.  Next use a Martha Stewart heart punch to “trim” the edges of the scarf.  Glue the scarf tails to the snowman.  Lastly glue together several of the small round punches together and let dry.  Then glue them to the scarf as the “knot”.
  4. To make the hat glue the large cloud punch to the top of the large green heart so the heart is upside down.  Allow to dry then hand trim the point as shown.  Glue that cut off tip behind the “hat” top.  Lastly

 

 

“Sew Cute” Handmade Greeting Card


cards 077“Sew Cute” Handmade Greeting Card

 

Here’s my latest handmade greeting card – and once again the theme is about something I HATE – sewing!!!!  But I do love “pretend” sewing so here it is for you to view!!!!

To make the quilt block I used a Fiskar’s Quilt Star punch and stacking square punches.  First I punched the shapes and then attached a piece of fabric to each shape.  Allow the glue to dry then cut the excess fabric off.

It was “Sew Easy!”

 

THANKS FOR TAKING A LOOK!!!

Mini Sunglasses Punch Art


 

summer 1 - Copy

Chillin’ At The Beach

 Mini Sunglasses Punch Art

Here are the really cute mini sunglasses punch art I designed for my Stampin’ Up Owl Builder Punches that I decked out for the beach because what self-respecting owl would be seen dead at the beach NOT wearing some shades?

 

MATERIALS

  • 4 “D” block letter punches (1/2″)
  • 2 circle punches (1/4″)
  • 1 rectangle punch (1/2″)
  • Adhesive

DIRECTIONS

  1. Assemble punch outs needed.
  2. Glue two “D”s together so that there is no gap.  I used two different colors for emphasis.  Of course if your letter punches are solid you don’t need to do this.
  3. Glue the circle punches to the backs of the sunglasses.
  4. Glue the rectangle punch to the back of the sunglasses.
  5. After they dry your sunglasses are ready for use.

001

THANKS SO MUCH FOR TAKING A LOOK!

buggalcrafts

Shamrock Card


Shamrock Card

001 (2)

Here’s a cute card I did for St. Patrick’s Day.  I didn’t have a clover punch as big as I wanted and haven’t yet gotten a die cut machine so I used 4 Martha Stewart heart punches and the branch from my Build-a-Bird Stampin Up Punch (for the stem).  I love this in that I can make the four leaf clover as big as I have a heart punch.  You could also use a smaller heart to layer the leaves for more depth.

Thanks for taking a look!

buggalcrafts

Layered Snow Capped Tree Die Cut From Punch Outs


003

Layered Snow Capped Tree Die Cut

From Punch Outs

I have really gotten into punching this past year.  I now have TONS of punches and am always looking for new ways to use them…. so I present to you my layered snowy trees!

This tree is made with an EK Success fir tree punch and a Fiskars’ cloud punch (I don’t know the size but the punch out measures a little under 1″).

THANKS FOR TAKING A LOOK!

002

Bats Flying Over The Moon Punch Out


001Bats Flying Over The Moon Punch Out

It’s me again with more PUNCH ART!  This Halloween bat punch art takes a little practice but it’s really so cute!

Thanks for taking a look!

This slideshow requires JavaScript.

Tombstone Punch Art


tombstonesTombstone Punch Art

Just want to share a cute little punch art project I made this evening in about 15 minutes and that included digging for the supplies!  Gravestones!  are Just what your Halloween scrapbook page or homemade card need to “get into the spirit” of things!

I used an EKsucces tag punch (I would have rounded the corners but the punch doesn’t fit in my corner rounder) to punch the tombstones then added a spider web stamp.  My tombstones look new but you could tear or cut them down to suggest decorating stones.

I used tiny punched letters but if your handwriting is better than mine you can write in a message.  These could even be used as place cards for a Halloween party.  Finally I added a spider punch.

THANKS SO MUCH FOR TAKING A LOOK!

Post Navigation

%d bloggers like this: